User manual

GS10/GS15, User Interface 23
Button
combinations
• rover mode and configured for a dial-up or Ntrip
connection: The RTK rover LED flashes green for 2 s.
The GS10/GS15 will connect to the RTK base station or
the Ntrip server configured.
• rover mode and not configured for a dial-up or Ntrip
connection: No action.
Button Function
Button Function
ON/OFF Press and hold buttons for 1 s.
Function The current almanacs stored on the GNSS instrument are
deleted and new almanacs are downloaded. The Position
LED flashes red quickly three times.
Press and hold buttons for 5 s.
The Memory LED flashes red quickly three times. The SD
card of the GNSS instrument is formatted. The Memory LED
continues to flash red as the SD card is formatted.