User guide

26
MultiFRAD User Guide
17 Record the IP address protocol information for your specific network in the space provided below:
Ethernet
___.___.___.___
IP Address
Mask
___.___.___.___
Frame Type
TYPE II/SNAP
WAN Port
___.___.___.___
IP Address
Mask
___.___.___.___
Remote Address
___.___.___.___
18 The default Ethernet IP Address has to be changed to your unique LAN address. Enter an
acceptable, unique IP address for the Ethernet port.
19 Change the default Subnet Mask and Frame Type to the values you have assigned to your LAN
port.
20 The default WAN Address has to be changed to your unique WAN address. Assign an acceptable
unique WAN Address to the WAN port.
21 Change the default Subnet Mask and Remote Address for WAN to the values you have assigned to
your WAN.
22 Click OK when you are satisfied with your selections.