User guide

MultiFRAD User Guide

Installing Your Software

The following procedure does not provide every screen or option used in the process of installing the

MultiFRAD software. The assumption is that a technical person with a thorough knowledge of

Windows and the software loading process is doing the installation. Additional information on the

MultiFRAD software is provided in the User Guide supplied with your MultiFRAD.

1 Run Windows on the PC that is connected to the Command Port.

2 Insert the MultiFRAD Disk 1 into the disk drive on the PC that is connected to the Command Port.

3 Win3.1 users - in Program Manager, click File | Run. In the Run dialog box, type a:\setup.exe or

b:\setup.exe (depending on the location of your floppy disk drive) in the Command Line field and

then click OK.

Win95/98/NT users - click Start | Run. In the Run dialog box, type (or click the down arrow and

choose) a:\setup or b:\setup (depending on the letter of your floppy disk drive) and then click OK.

4 The MultiFRAD 200 Series Setup Welcome screen is displayed.

Click Next> to continue.

5 Follow the on-screen instructions to install your MultiFRAD software.

You can choose the Destination Location of your MF200 software or you can accept the default

destination by clicking Next>. If you click Browse, you can select a different folder for your

MultiFRAD software; however, it is recommended that you accept the default folder, MF200.

6 The next dialog box enables you to name the Program Folder for the MF200 files. You can select the

default name, MultiFRAD 200, or name it anything you like; when done, click Next> to continue.