User guide

Software

the Clocking type and Speed (for Internal clock only) are

correct. Also, check that the Encoding Scheme, Between

Frames, and InterFrame Timer settings are correct for

your channel device. Refer to user documentation for the

parameters of the channel device.

If you are connecting to an Asynchronous data device,

select Asynchronous, then select the maximum Speed in

the drop-down list. Refer to the user documentation for the

parameters of the data device.

24. Click OK when you are satisfied with the configurations for

both data ports.

25. If you enabled PPP in the WAN Ports Default Setup dialog

box, proceed to step 37.