User guide
Software
Installing your Software
The following procedure does not provide every screen or option
used in the process of installing the MultiFRAD software. The
assumption is that a technical person with a thorough knowledge
of Windows and the software loading process is doing the
installation. Additional information on the MultiFRAD software is
provided in the User Guide supplied with your MultiFRAD II.
1. Run Windows on the PC that is connected to the
Command Port.
2. Insert the MultiFRAD II disk 1 into the disk drive on the PC
that is connected to the Command Port.
3. Win3.1 users - access Run by clicking the File menu in
Program Manager and then click Run. In the Run dialog
box, type a:\setup or b:\setup (depending on the letter of
your disk drive) in the Command Line field and then click
OK.
Win95 users - click the Start box and then click Run. In
the Run dialog box click the down arrow and choose
a:\setup.exe or b:\setup.exe (depending on the letter of
your disk drive) in the Command Line field and then click
OK.
4. Click Next> to continue, then follow the on-screen
instructions to install your MultiFRAD software.
11