User guide

Chapter 5: FaxFinder Operation
86 FaxFinder Administrator User Guide
Edit Menu
The following options are available from the Edit menu.
Add FaxFinder
Use Add FaxFinder to add a new FaxFinder unit to your client software.
1. Select the FaxFinder model family from the Type drop-down list.
● FFx30 for the FF130, FF230, FF430 and FF830
● FFx20 for the FF120, FF220, FF420 and FF820
● FFx40 for the FF240
2. Enter the IP address in the Server Address field.
3. If a secure login is required, check Use SSL.
4. Enter the Username and password required by the device.
Note: The username and password entered here must match the username and password
entries in on the FaxFinder Server User Configuration list. Username and password are
case-sensitive.
5. Click OK. A new FaxFinder entry appears on the Devices tab.
Options
Use Options to configure the FaxFinder client. The Options page has three tabs.
● Click OK to save your changes.
● Click Cancel to Cancel any changes made.
Date/Time Tab
Use the Date/Time tab to set the date and time formats for the fax header.