User guide

Chapter 2: Getting Started
FaxFinder Administrator User Guide 17
Connections
The images below show the back panels for FaxFinder x30 models. Following that is a description of the
connections called out in the image.
1. Line Ports. PSTN/POTS RJ 11 phone line connectors.
2. LAN/Ethernet Port. RJ 45 receptacle for network connection. The FaxFinder 130/230 units for
reasons of space constraints are labeled LAN, while the FF430/830 units show Ethernet.
3. Console/Command Port. DE-9 connection for serial access and control of the FaxFinder units.
4. Reset. (FF130/230) Access hole for reset button (use a straightened paper clip or similar tool to push
the recessed button).
5. Reboot. Pushing and releasing the button once will reboot the FaxFinder.
6. Reset (FF430/830). Holding the button in for 3 seconds and releasing will reset the FaxFinder to
factory defaults.
7. Power Connector. Threaded connector for the provided power supply.
8. Power Socket. Power receptacle for provided power cord.