User guide

Chapter 3: FaxFinder Web Management Interface
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 62
Store & Forward Fax (T.37)
Store and Forward fax (or T.37) is described in detail with examples in a later chapter. Here we are
describing the parameters for T.37 that can be input into the FaxFinder unit through the web interface.
Store & Forward Fax (T.37): Parameters
Enable T.37
To allow th
e use of Store and Forward faxing on this FaxFinder unit, check this box, else it will
not be allowed.
Require Authentication
Check
the Require Authentication box to force users to have a valid username and password to
use Store and Forward faxing.
Set User From Envelope Sender
Check this
box if you want to associate faxes sent out via T.37 Emails with user accounts found
in the Users menu of this FaxFinder. The FaxFinder will look to match the Envelope Sender Email
address contained within the T.37 Emails to the Email address of user accounts in the Users
database. When a match occurs, this fax will be logged as being sent by this user. Additionally, if
the Include Cover Page option is enabled, the user's information will be used to populate the
Sender Information of the cover page.
Default Scheduling Priority
Select
the priority for scheduling store and forward faxing. The range is 0 to 5, with 0 being the
highest priority. This setting will come in to play when there are more faxes in the queue that
need to be sent out than there are available internal modems.
Maximum Tries
Enter
the maximum number of tries that you want the FaxFinder to attempt without a
successful completion before considering the fax as failed.
Interval Between Tries
Enter
the time in seconds that you want the FaxFinder to wait between unsuccessful
transmission attempts.