User guide

Chapter 3: FaxFinder Web Management Interface
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 48
Routing Definition
The formula of the selected PBX mode code is displayed here. The pre-defined vendor specific
PBX mode codes provided via the Routing menu cannot be changed. If your model of PBX is not
listed or if our pre-defined code for your brand of PBX does not match what your PBX is sending,
then select the "User Defined" Routing option. When User Defined is selected, the Routing
Definition field is used to create your own formula/definition. The purpose of the definition is to
identify the elements within the code sent by the PBX, so the FaxFinder can mask information
not needed and identify the extension number that is needed. Click on the Key
link for a
translation of parameter options.
Key
Clicking on the Key link will bring up a window with a list of potential parameters that can be set
for each modem. The n for each definition is the variable number.
For Call Type, Calling Number and Internal Code ($tn, $cn, $in) replace n with the number of
digits you want masked or ignored.
For Extension digits ($xn), replace n with the number of extension digits used for inbound
routing of faxes to recipients listed in the inbound routing configuration. For predefined mode
codes that use “$x?” as the Extension Digits variable - use the Max DTMF Digits parameter to
define the number of DID extension digits to use.
Description
This will explain the mode code definition currently selected (if any) in the "Routing Definition"
field.
Error Correction
Select On or
Off for T.30 error correction to be used or not for this modem. Default is ‘On.’
Max Baud Rate
Select the ma
ximum connection (baud) rate that is to be allowed on the modem. Default is
14400.
Smart Dial
Select On or
Off to have Smart Dial available or not to the modem. With Smart dial set to ‘On’,
the modem will wait to detect a dial tone before dialing.
Dial Prefix
Defining a
dial prefix (e.g. a "9" to dial an outside line) is a global setting applied to all outbound
calls made from this modem port. Any value defined here will be added to the beginning
(prefixed) to all fax numbers of outbound faxes, regardless of how (or by who) a fax was
submitted.
Tone Dial
Select O
n or Off for Tone dialing (‘Off’ would indicate pulse dialing). Default is On.