User guide

Chapter 3: FaxFinder Web Management Interface
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 36
Time
Time Configuration
Correct ti
me settings are important for logging and verification purposes. This section allows you to
enter a preferred time server as well as your preferences for time and date display format.
Time Server
Select a
time server from the choices available in the drop-down box or you may also select
‘none.’ When you select None, the Time and Date settings are no longer grayed-out and are
available for you to set the current time.
Add Time Server
Here you
may enter the name or address of a time server different from those available in the
drop-down list.
Synchronize Every
Enter
the interval of time that you want the FaxFinder to synchronize with the time server. This
is only valid if you have selected a time server.
Time Zone
Select
the time zone where the FaxFinder will be located from the drop-down list. Changing the
time zone requires a reboot of the FaxFinder for it to take effect. A pop-up will alert you that a
reboot will be performed, to which you may select cancel if you do not want to reboot at this
time.
Date Format
Select
the format that you want the date to be presented in. Key: ‘M’ is for month, ‘D’ is for day
and ‘Y’ is for the year.
Time Format
Select
the time format that you want information presented in (options are 24 or 12 hour).
Time (24 hour) hh:mm:ss
Enter
or verify that the time is what you expect it to be. Key: ‘H’ is for hour, ‘M’ is for minute and
‘S’ is for seconds. This is only for when the Time Server has been set to “None.”
Date mm/dd/yyyy
Enter
or verify that the date is what you expect it to be. Key: ‘M’ is for month, ‘D’ is for day and
‘Y’ is for the year. This is only for when the Time Server has been set to “None.”
Save button
When you
have entered your information, be sure to click the save button before navigating
away from this page, else your changes will be lost.