User guide

Chapter 3: FaxFinder Web Management Interface
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 25
Action
These options are only available to an administrator.
Initialize
Clicking on this link will send the initialization command string to the modem. This will
also remove the busy-out state from a modem. When the initialization is complete, you
will see a colored message bar at the top of the screen indicating that ‘modem x
initialized.’ Using this action while a fax transmission is in progress will interrupt the fax
and cause it to fail.
Busy
Clicking on this link will set the modem to a busy state, meaning that the modem will
not send or receive faxes. Any incoming calls to this modem will receive the busy tone.
To reverse this state and allow faxes to come in or be sent out, click on the ‘Initialize’
link for the modem.
Inbound Fax Status
Inbound
Fax Status displays information pertaining to each fax that is incoming, divided into a variety of
categories.
State
This column
displays the state of a fax that has not yet been completely received.
Messages include: receiving or delivering.
Start Time
This shows th
e time that the inbound fax was initiated.
Line Number
This column
displays the sequential modem number associated with each internal modem
based on the FaxFinder model (1 for the FF130, 1-2 for the FF230, 1-4 for the FF430 and 1-8 for
the FF830).
Extension
This will
show the detected DID routing number provided by the PBX (when applicable).
Recipient
This will
display the recipient Username associated with the DID extension number or the Line
Name of the receiving port when set to POTS Line routing.
Remote ID
This shows the Fax ID infor
mation sent from the fax originator.
Current Page
This will
show what page is currently being received.