User guide

FaxFinder Cabling Guide Cabling Instructions
MultiTech Systems, Inc. 15
4. Connect to Telephony Service
The FaxFinder’s fax modems can either be connected to a PBX
(for use in Automated Routing Mode) or to a POTS line
(for use in Manual Routing Mode).
Connection for
Automated Routing Mode
Connection for
Manual Routing Mode
Plug one end of the phone
cable into the FaxFinder’s
LINE jack and the other
into an available Station
Port on the PBX.
Plug one end of the phone
cable into the FaxFinder’s
LINE jack and the other end
into your standard telephone
receptacle.
One RJ11-to-RJ11 cable is included for each port of your
FaxFinder (1 for FF120, 2 for FF220; 4 for FF420; 8 for FF820).
Automated Routing Mode
Manual
Routing
Mode
COMMAND
ETHERNET
87
5
312 4
6
LINE 1
LINE 2 LAN 1
CONSOLE
RESET