User guide

Client Operation Multi-Tech FaxFinder Quick Start
42
Sending a Fax (Detailed Version)
To send a fax by printing from an application program on a client
PC, follow the steps listed below.
1. The client PC and the FaxFinder server must both be connected
to the same Ethernet LAN system. (See the section “Part B:
Configuring the FaxFinder Server” earlier in this manual.)
2. The FaxFinder client software must be installed on the PC. (See
the section “Installing FaxFinder Client Software” earlier in this
manual.)
3. After installation, the FaxFinder Fax Client Software program
will be running whenever the PC is on. You can view the
FaxFinder program's main window by clicking on the FaxFinder
icon at the lower right of the PC’s monitor screen in its
Application Tray -- and then selecting “Show FaxFinder Client
Software.”
Note: Normally, the user can shut down the FaxFinder program
by selecting "exit" either from the tray icon or from the
main FaxFinder program screen.
If the program has been shut down, it can be restarted
from the Windows Start menu.