User guide

Server Installation Multi-Tech FaxFinder Quick Start
20
U.S.A.) require that the originating phone number be printed on
each fax page. The value entered in the “Fax ID” field will
appear in the fax log printed by the sender’s fax machine and,
typically, will be printed at the top of each page of the
transmitted fax.
e. Smart Dial. When Smart Dial mode is ON, the FaxFinder will
look for a dial tone before dialing. If, under normal
circumstances, no dial tone is presented to the FaxFinder, then
set Smart Dial to OFF. When Smart Dial is OFF, the FaxFinder
modem will seize the phone line and dial after a 3-second pause
whether a dial tone is present or not.
Hint: If ‘no dial tone’ messages appear consistently,
set Smart Dial to OFF.
f. Click Update.
Hank Gregory
admin [e-mail]
POTS Li ne hg [e-mail]
Dead Letter Box
Name
User ID Email Address
DID# Function
Phone Book
add
update
delete
update
update
update
delete
delete
delete
update
update
update
hg [e-mail]
hank
Hank Gregory - Admin
[e-mail] 2426
g. Click on Current Status. Watch the Current Status: POTS
Modem 2 portion of the screen. The “State” of the POTS
Modem should be “Waiting for Ring.”
h.Test Call.. From a different POTS phone, dial the number of the
POTS phone line to which the FaxFinder is attached.
i. In the Current Status: POTS Modem 2 screen, the "State" field
should change to "Waiting for Connect." On the phone, you
should hear modem dialup/negotiation tones.