User guide

Multi-Tech FaxFinder Quick Start Server Installation
11
2. Logging In (I)
a. Bring up a Web browser on your pc. At the browser’s address
line, type the default Gateway address: http://192.168.2.1 and
press Enter.
b. The Login screen will appear.
At this point you can be assured that the FaxFinder is connected
to the network.
If the Login screen does not appear, see item #1, “What if I
can’t see the web page for my FaxFinder?” in the
Troubleshooting section of the Administrator User Guide.
c. At the Login screen, enter admin (all lower case) in the User
Name field.
d. Enter admin (all lower case) in the Password field.
e. Click the Login button. The Web Management Home screen
will appear. From this screen, you can access all of the
FaxFinder Server software screens.
3. Setting FaxFinder IP Addresses
a. In the FaxFinder Administration screen, go to the IP
Configuration fields.
Administration: IP Configuration
IP Address
192.168.4.89
Subnet Mask
Name Server
Default Gateway
Secondary
Name Server
update
255.255.255.0
192.168.11.251
192.168.4.1
b. Fill in the IP information that applies to your FF110 FaxFinder
Server unit. The fields for “IP Address,” “Subnet Mask,” “Default
Gateway” and “Name Server” are required. A “Secondary
Name Server” may be considered optional.
c. Click Update.