Specifications
ADVANCED CONFIGURATION
Note: Click Defaults to restore the factory default settings.
1. Click Fax Configuration > Store & Forward Fax (T.37).
2. Check Enable T.37.
3. Set parameters and click Save.
Store & Forward (T.37) Parameters
Field Description
Enable T.37 Check to enable T.37 faxing.
Require Authentication Check to require a valid username and password to use with Store & Forward faxing.
Set User from Envelope Check to link faxes sent via T.37 emails with user accounts found in the FaxFinder
Sender Users menu. When FaxFinder matches a sender's email address with a FaxFinder user,
it logs the fax as sent by that user. Also, if you enable Include Cover Page, FaxFinder
populates the cover page's sender information with the user's information.
Fax Priority Set the default priority for store and forward faxing. This setting is used when there
are more faxes in the queue than there are available modems. Options are:
■ Low
■ Medium/Low
■ Medium
■ Medium/High
■ High
■ 1st Priority
Max Attempts Enter the maximum number of times you want FaxFinder to fail sending an email fax
before treating that fax as failed.
Retry Interval Enter how long, in seconds, you want FaxFinder to wait between unsuccessful
transmission attempts.
Email Fax Receipt Set the condition that will trigger an email to the sender. Options are:
Failure Receipt sent only if the fax fails.
Always Receipt sent on completion, success or failure.
Never Receipts are never sent.
Fax Attachment with Attaches a copy of the sent fax with the email fax receipt. Use this drop down list to
Receipt select the attachment format. Options are. PDF, TIFF, or None. Default is PDF.
Include Cover Page Check this to include a cover page with Store & Forward faxes.
Default Cover Page Select the cover page to use by default with Store & Forward faxes.
Use Email Body as Check this if you want the body of the email inserted as fax comments.
Comments
Adding Additional Hosts
You can add additional hostnames and IP addresses that FaxFinder will accept email faxes from. For example, your
hostname is example.com, but you also want to allow T.37 faxing from mycompany.example.com.
62 FaxFinder
®
Fax Server FF240, FF440, FF840 Administrator Guide