Manualshelf

Specifications

ManualsBrandsMultitech ManualsComputer equipmentFaxFinder FF840
41424344454647484950
FAX MANAGEMENT
Field Description
Call Log
# A sequential number associated with each internal modem based on the FaxFinder
model: 1-2 for the FF240, 1-4, for the FF440, and 1-8 for the FF840. If using an
Expansion Module, 8 or 16 additional modems are listed.
Port Shows the modem number by unit. The first number indicates the server or expansion
module. The second number indicates which modem in that unit. If you only have a fax
server, the first number is always 1.
Status Modem status for this log entry, pass or fail. If the fax failed, point to the log entry to
display the failure's cause.
Direction Indicates if the fax was inbound or outbound.
Fax Number The destination fax number.
Time The date and time the log entry was created.
Size The size of the entire fax transmission.
Pages Number of pages faxed for this log entry.
Details Click to display Call Log Details in a new window.
Rebooting FaxFinder
Reboot stops any faxes in process. FaxFinder cannot send or receive faxes during the reboot process.
To immediately reboot FaxFinder:
1. Click System Configuration > Reboot.
2. Click Reboot to log off the current user and restart the FaxFinder.
Restoring Factory Defaults
To restore the factory default settings:
1. Click System Configuration > Save/Restore.
2. Click Restore Factory Defaults to reset all FaxFinder settings. FaxFinder asks you confirm the restore and
reboot FaxFinder. Click OK to confirm or click Cancel.
Restoring Configuration
If you created a restore file, use Restore Config to reset FaxFinder using the .BIN file. This overwrites current
settings with the settings in place at the time the restore file was created. You will lose any configuration changes,
including user information, entered after the restore file was created.
To create restore points, refer to Creating a Restore File.
1. Click System Configuration > Save/Restore.
2. Click Browse and select a configuration .BIN file.
3. Click Restore. FaxFinder prompts you to reboot.
FaxFinder
®
Fax Server FF240, FF440, FF840 Administrator Guide 45