Specifications
FAX MANAGEMENT
Field Description
Time Server Status This is the status of the time server currently in use. It also shows error messages.
Status Description
Disabled Time server likely set to None.
Synchronizing FaxFinder is currently synchronizing with the time server.
Synchronized at FaxFinder last synchronized with the time server at the specified
[date/time], offset ±nn date and time. The offset, if any, indicates how much FaxFinder
seconds adjusted its time.
Failed to synchronize: Time synchronization failed due to the error shown.
[error]
Printer Status
Printer Status Current status of each printer set up in System Configuration > Printers.
Network Share Status
Network Share Status Current status of any network shares set up in System Configuration > Shares.
Checking Modem and Fax Status
Use the Fax Status page to view the current state for each modem. It includes the status of any inbound or
outbound faxes. Users can immediately send or abort outbound faxes. Administrators can also reset busy modems
and block inbound or outbound faxes from a modem.
To view a status, click Status & Logs > Fax Status.
Field Description
Modem Status
# A sequential number associated with each internal modem based on the FaxFinder model:
1-2 for the FF240, 1-4, for the FF440, and 1-8 for the FF840. If using an Expansion Module 8
or 16 additional modems are listed.
Port Shows the modem number by unit. The first number indicates if the modem is in the fax
server or expansion module. The second number indicates which modem in the server or
expansion module. If you only have a fax server, the first number is always 1.
State Current modem state: Idle, Waiting for Ring, Initializing, Waiting for Connect, Processing,
Dialing, Negotiating, Connected, Sending, Receiving, or Busied Out.
Page Page that a modem is currently transmitting, if any.
Connect Time When the current connection was made.
Fax When sending, this the dialed fax number. When receiving, this is the DID number
detected.
Resolution Appears when you point to an active modem. Resolution used to transmit the page.
Vertical scan line types include fine and standard.
Baud Rate Appears when you point to an active modem. Modem's current baud rate.
40 FaxFinder
®
Fax Server FF240, FF440, FF840 Administrator Guide