Specifications
Table Of Contents
- Product Overview
- Hardware and Installation
- Basic FaxFinder Configuration
- Configuring FaxFinder's IP Address and Network Settings
- Updating the Admin Account
- Setting Time
- Configuring SMTP
- Sending a Test Fax from Fax Machine to FaxFinder
- Adding a Printer (Optional)
- Adding a Network Share (Optional)
- Using a Server Certificate
- Adding Individual Users
- Adding Global Contacts Individually
- Routing Inbound Faxes
- Configuring Modems
- Creating a Restore File
- Fax Management
- Logging into the Web Management Interface
- Navigating the Web Management Interface
- Checking System, Printer, and Share Status
- Checking Modem and Fax Status
- Sending Now
- Canceling Outbound Faxes
- Resetting a Busy Modem
- Blocking a Modem's Inbound and Outbound Faxes
- Checking the Mail Queue
- Viewing Logs
- Rebooting FaxFinder
- Restoring Factory Defaults
- Restoring Configuration
- Managing Users, Contacts, and Recipients
- Advanced Configuration
- Dialing Rules
- Using Active Directory with FaxFinder
- Cover Pages
- FaxFinder Fax Client Software for Windows and Mac
- Troubleshooting
- T.37 Advanced Usage
- Regulatory Information
- 47 CFR Part 68 Telecom
- 47 CFR Part 15 Regulation Class A Devices
- Fax Branding Statement
- Canadian Limitations
- Industry Canada Class A Notice
- EMC, Safety, and R&TTE Directive Compliance
- Restriction of the Use of Hazardous Substances (RoHS)
- REACH Statement
- Waste Electrical and Electronic Equipment Statement
- Information on HS/TS Substances According to Chinese Standards
- Information on HS/TS Substances According to Chinese Standards (in Chinese)
- Configuring Active Directory for Use with FaxFinder
- Index
FAXFINDER FAX CLIENT SOFTWARE FOR WINDOWS AND MAC
4. Enter Device information. If using Auto-Discover Device, skip to Step 4c.
a. Enter the IP address in the Server Address field.
b. If a secure login is required, check Use SSL.
c. Enter the Username and Password required by the device.
Check Show Password to display the password instead.
Note: Username and password are case-sensitive.
5. Click OK. Close the Auto Discover Device window, if using that option.
If Authentication Failure appears for that fax server, either:
■ The IP address is wrong. If so, delete the server (click the Delete icon) and add the server again; OR
■ The username and password combination is wrong. Click the Edit Server icon and enter the correct
username and password.
Disassociating a FaxFinder Unit from the Client
Use this procedure if you need to remove a specific FaxFinder unit from the client. This procedure severs the tie
between your PC and a specific FaxFinder unit so that you cannot use it to send faxes. However, you can receive
faxes in email form from the FaxFinder server.
If you have multiple FaxFinders set up in the client software and only want to remove one, you will need to know
the IP address of the FaxFinder you want to disconnect.
1. If the FaxFinder Client is not running, click the FaxFinder Client icon, .
2. Click Fax Servers
3. Click for the server you want to disassociate.
FaxFinder
®
Fax Server FF240, FF440, FF840 Administrator Guide 89