Specifications
Table Of Contents
- Product Overview
- Hardware and Installation
- Basic FaxFinder Configuration
- Configuring FaxFinder's IP Address and Network Settings
- Updating the Admin Account
- Setting Time
- Configuring SMTP
- Sending a Test Fax from Fax Machine to FaxFinder
- Adding a Printer (Optional)
- Adding a Network Share (Optional)
- Using a Server Certificate
- Adding Individual Users
- Adding Global Contacts Individually
- Routing Inbound Faxes
- Configuring Modems
- Creating a Restore File
- Fax Management
- Logging into the Web Management Interface
- Navigating the Web Management Interface
- Checking System, Printer, and Share Status
- Checking Modem and Fax Status
- Sending Now
- Canceling Outbound Faxes
- Resetting a Busy Modem
- Blocking a Modem's Inbound and Outbound Faxes
- Checking the Mail Queue
- Viewing Logs
- Rebooting FaxFinder
- Restoring Factory Defaults
- Restoring Configuration
- Managing Users, Contacts, and Recipients
- Advanced Configuration
- Dialing Rules
- Using Active Directory with FaxFinder
- Cover Pages
- FaxFinder Fax Client Software for Windows and Mac
- Troubleshooting
- T.37 Advanced Usage
- Regulatory Information
- 47 CFR Part 68 Telecom
- 47 CFR Part 15 Regulation Class A Devices
- Fax Branding Statement
- Canadian Limitations
- Industry Canada Class A Notice
- EMC, Safety, and R&TTE Directive Compliance
- Restriction of the Use of Hazardous Substances (RoHS)
- REACH Statement
- Waste Electrical and Electronic Equipment Statement
- Information on HS/TS Substances According to Chinese Standards
- Information on HS/TS Substances According to Chinese Standards (in Chinese)
- Configuring Active Directory for Use with FaxFinder
- Index
ADVANCED CONFIGURATION
Field Description
Password Enter authentication password required for SNMP V3. Must be between 8-32 characters
long.
Confirm Password Re-enter the authentication password.
Engine ID Engine ID is a unique identifier for the SNMP agent that receives SNMP traps. Engine ID
must include the 0x prefix and be a hexadecimal string between 5-32 octets long. For
example, 0x0102030405. Use the default Engine ID value generated automatically by
FaxFinder.
SNMP Traps
Trap Description
FaxFinder server is up Issued after the system completes a reboot.
The disk is nearing full Issued if empty space on the FaxFinder hard drive is less than 10%.
(reached 90% threshold
value)
The modem is stuck (multiple Issued for FFx40 modems only. If the modem occasionally gets stuck and do not
timeouts on initialization) respond on the AT commands, the trap is issued.
The network share could not Issued when FaxFinder cannot access a network share to save files.
be reached (network failure)
The SMTP server is not Issued when an email fails when sent.
reachable
Error while archiving the Issued when FaxFinder cannot archive file because there is no space left on device.
faxes (the archive log is full)
The SFTP server access failed Issued when FaxFinder cannot access SFTP server while archiving the faxes.
Cannot access the SNTP Issued when FaxFinder cannot access SNTP server for time synchronization.
server for time
synchronization
The expander module has Issued when the expansion module is disconnected from FaxFinder.
been unplugged
The expander module has Issued when the expansion module is connected to FaxFinder.
been plugged in
The recent fax took a long Issued when the time between when the fax is supposed to be scheduled and
time when the scheduling actually starts exceeds four hours.
70 FaxFinder
®
Fax Server FF240, FF440, FF840 Administrator Guide