Specifications
Table Of Contents
- Product Overview
- Hardware and Installation
- Basic FaxFinder Configuration
- Configuring FaxFinder's IP Address and Network Settings
- Updating the Admin Account
- Setting Time
- Configuring SMTP
- Sending a Test Fax from Fax Machine to FaxFinder
- Adding a Printer (Optional)
- Adding a Network Share (Optional)
- Using a Server Certificate
- Adding Individual Users
- Adding Global Contacts Individually
- Routing Inbound Faxes
- Configuring Modems
- Creating a Restore File
- Fax Management
- Logging into the Web Management Interface
- Navigating the Web Management Interface
- Checking System, Printer, and Share Status
- Checking Modem and Fax Status
- Sending Now
- Canceling Outbound Faxes
- Resetting a Busy Modem
- Blocking a Modem's Inbound and Outbound Faxes
- Checking the Mail Queue
- Viewing Logs
- Rebooting FaxFinder
- Restoring Factory Defaults
- Restoring Configuration
- Managing Users, Contacts, and Recipients
- Advanced Configuration
- Dialing Rules
- Using Active Directory with FaxFinder
- Cover Pages
- FaxFinder Fax Client Software for Windows and Mac
- Troubleshooting
- T.37 Advanced Usage
- Regulatory Information
- 47 CFR Part 68 Telecom
- 47 CFR Part 15 Regulation Class A Devices
- Fax Branding Statement
- Canadian Limitations
- Industry Canada Class A Notice
- EMC, Safety, and R&TTE Directive Compliance
- Restriction of the Use of Hazardous Substances (RoHS)
- REACH Statement
- Waste Electrical and Electronic Equipment Statement
- Information on HS/TS Substances According to Chinese Standards
- Information on HS/TS Substances According to Chinese Standards (in Chinese)
- Configuring Active Directory for Use with FaxFinder
- Index
ADVANCED CONFIGURATION
1. If you are not on the Store & Forward Fax page, click Fax Configuration > Store & Forward Fax (T.37).
2. Click Add.
3. Enter the hostname or IP address and click Save.
Configuring SNMP
Enable Simple Network Management Protocol (SNMP) on FaxFinder so that your SNMP manager will be able to get
MIB (Management Information Base) values. FaxFinder Server supports SNMP version 1, 2C and 3 read-only
requests.
Viewing Available MIBs
To view available MIBs:
1. Go to System Configuration > SNMP.
2. Click Download MIB.
Configuring SNMP Version 1 and 2C
To configure for SNMP Version 1 and 2C:
1. Go to System Configuration > SNMP.
2. Check Enable SNMP V1/V2C.
3. Enter Community Name. The default value is public.
4. Click Save.
Configuring SNMP Version 3
To configure for SNMP Version 3:
1. Go to System Configuration > SNMP.
2. Check Enable SNMP 3.
3. Enter Username, Password, and Confirm Password.
4. Click Save.
Note: For SNMP Version 3, the security level is Authentication - No Privacy and the Authentication Protocol is
MD5. These settings are not configurable.
SNMP Settings
Field Description
Community Name Enter read-only community name. May contain a-z, A-Z, 0-9, - and _. Max length is 32
characters. Required for SNMP V1/V2C. Default is public.
Username Enter the username required for SNMP V3. Must be between 5-32 characters long. <ay
contain a-z, A-Z, 0-9, - and _.
Password Enter authentication password required for SNMP V3. Must be between 8-32 characters
long.
Confirm Password Re-enter the authentication password.
68 FaxFinder
®
Fax Server FF240, FF440, FF840 Administrator Guide