Specifications
Table Of Contents
- Product Overview
- Hardware and Installation
- Basic FaxFinder Configuration
- Configuring FaxFinder's IP Address and Network Settings
- Updating the Admin Account
- Setting Time
- Configuring SMTP
- Sending a Test Fax from Fax Machine to FaxFinder
- Adding a Printer (Optional)
- Adding a Network Share (Optional)
- Using a Server Certificate
- Adding Individual Users
- Adding Global Contacts Individually
- Routing Inbound Faxes
- Configuring Modems
- Creating a Restore File
- Fax Management
- Logging into the Web Management Interface
- Navigating the Web Management Interface
- Checking System, Printer, and Share Status
- Checking Modem and Fax Status
- Sending Now
- Canceling Outbound Faxes
- Resetting a Busy Modem
- Blocking a Modem's Inbound and Outbound Faxes
- Checking the Mail Queue
- Viewing Logs
- Rebooting FaxFinder
- Restoring Factory Defaults
- Restoring Configuration
- Managing Users, Contacts, and Recipients
- Advanced Configuration
- Dialing Rules
- Using Active Directory with FaxFinder
- Cover Pages
- FaxFinder Fax Client Software for Windows and Mac
- Troubleshooting
- T.37 Advanced Usage
- Regulatory Information
- 47 CFR Part 68 Telecom
- 47 CFR Part 15 Regulation Class A Devices
- Fax Branding Statement
- Canadian Limitations
- Industry Canada Class A Notice
- EMC, Safety, and R&TTE Directive Compliance
- Restriction of the Use of Hazardous Substances (RoHS)
- REACH Statement
- Waste Electrical and Electronic Equipment Statement
- Information on HS/TS Substances According to Chinese Standards
- Information on HS/TS Substances According to Chinese Standards (in Chinese)
- Configuring Active Directory for Use with FaxFinder
- Index
BASIC FAXFINDER CONFIGURATION
3. Click Add and enter your network folder information. Refer to Network Share Fields for details.
4. Click Save. Network Share updated appears at the top of the page.
Network Share Fields
FaxFinder's factory default IP address is 192.168.2.1 and 24 bit network mask is 255.255.255.0.
Field Description
UNC/Location Enter the Universal Naming Convention identifier or network location of up to 50
characters, for example, //server/service or \\server\service.
Username Enter a username that has write access to the shared location. This can be a general
account or one specific to the shared folder.
Password Enter the password associated with the above username.
Confirm Password Re-enter the password in order to avoid possible errors.
Using a Server Certificate
FaxFinder allows you to upload or generate a server certificate.
Upload a Server Certificate
The server certificate file must be named server_cert.pem. FaxFinder requires a certificate that is a combined
private key and certificate file with the following sections:
-----BEGIN PRIVATE KEY-----
.
.
-----END PRIVATE KEY----
-
-----BEGIN CERTIFICATE-----
.
.
-----END CERTIFICATE-----
To upload a certificate:
1. Click System Configuration > Certificates.
2. Click Upload.
3. Browse to your certificate.
4. Enter certificate information. Refer to Server Certificate Parameters for details. The values you enter are
for identification purposes only.
5. Click Save. You will be prompted to reboot FaxFinder.
6. Reboot FaxFinder.
Generating a Server Certificate
Because FaxFinder uses a self-signed website certificate, your browser will show a certificate error and warning.
Ignore the warning or, depending on your browser, add an exception or add your FaxFinder IP address to your
trusted sites.
30 FaxFinder
®
Fax Server FF240, FF440, FF840 Administrator Guide