Specifications
Table Of Contents
- Product Overview
- Hardware and Installation
- Basic FaxFinder Configuration
- Configuring FaxFinder's IP Address and Network Settings
- Updating the Admin Account
- Setting Time
- Configuring SMTP
- Sending a Test Fax from Fax Machine to FaxFinder
- Adding a Printer (Optional)
- Adding a Network Share (Optional)
- Using a Server Certificate
- Adding Individual Users
- Adding Global Contacts Individually
- Routing Inbound Faxes
- Configuring Modems
- Creating a Restore File
- Fax Management
- Logging into the Web Management Interface
- Navigating the Web Management Interface
- Checking System, Printer, and Share Status
- Checking Modem and Fax Status
- Sending Now
- Canceling Outbound Faxes
- Resetting a Busy Modem
- Blocking a Modem's Inbound and Outbound Faxes
- Checking the Mail Queue
- Viewing Logs
- Rebooting FaxFinder
- Restoring Factory Defaults
- Restoring Configuration
- Managing Users, Contacts, and Recipients
- Advanced Configuration
- Dialing Rules
- Using Active Directory with FaxFinder
- Cover Pages
- FaxFinder Fax Client Software for Windows and Mac
- Troubleshooting
- T.37 Advanced Usage
- Regulatory Information
- 47 CFR Part 68 Telecom
- 47 CFR Part 15 Regulation Class A Devices
- Fax Branding Statement
- Canadian Limitations
- Industry Canada Class A Notice
- EMC, Safety, and R&TTE Directive Compliance
- Restriction of the Use of Hazardous Substances (RoHS)
- REACH Statement
- Waste Electrical and Electronic Equipment Statement
- Information on HS/TS Substances According to Chinese Standards
- Information on HS/TS Substances According to Chinese Standards (in Chinese)
- Configuring Active Directory for Use with FaxFinder
- Index
HARDWARE AND INSTALLATION
Connector Descriptions
Label Description
1-8 PSTN/POTS RJ 11 phone line ports. The FaxFinder 240 has ports 1-2, the FaxFinder 440 has
ports 1-4, and the FaxFinder 840 has ports 1-8. Ports on the back line up with the modem
LEDs on the front.
+12V Power receptacle for provided power cord.
CONSOLE DE-9 connection for serial access and control of the FaxFinder.
USB Used to connect a FaxFinder Expansion Unit.
RESET Use to reboot the FaxFinder.
LAN 1 RJ-45 receptacle for network connection.
LED Descriptions
Label Name Description
Speed Speed When lit, if the color is:
Green: Ethernet rate is 1000 Mbps
Yellow: Ethernet rate is 100 Mbps
Unlit: Ethernet rate is 10 Mbps
Link/Act Link / Activity Lit when a physical link has been established with the Ethernet network. Blinks
when there is activity.
HDD High Density When the internal hard drive is accessed, this LED is yellow. When unlit, HDD is
Drive not being accessed.
Power Power Solid (constant) green if unit is on.
One set of the following for each modem/port:
TD Transmit Data TD LED flashes when the modem transmits data to another modem.
RD Receive Data RD LED flashes when the modem receives data from another modem.
CD Carrier Detect Carrier of remote modem is detected.
FaxFinder Expansion Module Connectors and LEDs
This topic applies to optional FaxFinder Expansion Modules.
FaxFinder FFEX8
FaxFinder FFEX8 Connectors
18 FaxFinder
®
Fax Server FF240, FF440, FF840 Administrator Guide