Specifications
Table Of Contents
- Product Overview
- Hardware and Installation
- Basic FaxFinder Configuration
- Configuring FaxFinder's IP Address and Network Settings
- Updating the Admin Account
- Setting Time
- Configuring SMTP
- Sending a Test Fax from Fax Machine to FaxFinder
- Adding a Printer (Optional)
- Adding a Network Share (Optional)
- Using a Server Certificate
- Adding Individual Users
- Adding Global Contacts Individually
- Routing Inbound Faxes
- Configuring Modems
- Creating a Restore File
- Fax Management
- Logging into the Web Management Interface
- Navigating the Web Management Interface
- Checking System, Printer, and Share Status
- Checking Modem and Fax Status
- Sending Now
- Canceling Outbound Faxes
- Resetting a Busy Modem
- Blocking a Modem's Inbound and Outbound Faxes
- Checking the Mail Queue
- Viewing Logs
- Rebooting FaxFinder
- Restoring Factory Defaults
- Restoring Configuration
- Managing Users, Contacts, and Recipients
- Advanced Configuration
- Dialing Rules
- Using Active Directory with FaxFinder
- Cover Pages
- FaxFinder Fax Client Software for Windows and Mac
- Troubleshooting
- T.37 Advanced Usage
- Regulatory Information
- 47 CFR Part 68 Telecom
- 47 CFR Part 15 Regulation Class A Devices
- Fax Branding Statement
- Canadian Limitations
- Industry Canada Class A Notice
- EMC, Safety, and R&TTE Directive Compliance
- Restriction of the Use of Hazardous Substances (RoHS)
- REACH Statement
- Waste Electrical and Electronic Equipment Statement
- Information on HS/TS Substances According to Chinese Standards
- Information on HS/TS Substances According to Chinese Standards (in Chinese)
- Configuring Active Directory for Use with FaxFinder
- Index
PRODUCT OVERVIEW
FaxFinder Power Draw
FaxFinder power draw at 12 volts.
FF240
Typical
1
Maximum
2
Peak
3
Current (AMPS) 0.91 1.08 1.30
Watts 11.06 13.05 --
FF440
Typical
1
Maximum
2
Peak
3
Current (AMPS) 1.14 1.20 1.45
Watts 13.77 14.47 --
FF840
Typical
1
Maximum
2
Peak
3
Current (AMPS) 1.35 1.45 1.70
Watts 16.21 17.40 --
Multi-Tech Systems, Inc. recommends that the customer incorporate a 10% buffer into their power source when
determining product load.
1
Typical is the current while the unit is powered up, but not sending or receiving faxes.
2
Maximum is the current while sending or receiving faxes.
3
Peak is the current while sending or receiving faxes.
FaxFinder Expansion Modules Power Draw
FaxFinder Expansion Module power draw at 9 volts.
FFEX8
Typical
1
Maximum
2
Peak
3
Current (AMPS) 0.837 0.895 0.940
Watts 7.59 8.11 --
FFEX16
Typical
1
Maximum
2
Peak
3
Current (AMPS) 1.430 1.560 1.630
Watts 12.81 13.95 --
FaxFinder
®
Fax Server FF240, FF440, FF840 Administrator Guide 13