Specifications
Table Of Contents
- Product Overview
- Hardware and Installation
- Basic FaxFinder Configuration
- Configuring FaxFinder's IP Address and Network Settings
- Updating the Admin Account
- Setting Time
- Configuring SMTP
- Sending a Test Fax from Fax Machine to FaxFinder
- Adding a Printer (Optional)
- Adding a Network Share (Optional)
- Using a Server Certificate
- Adding Individual Users
- Adding Global Contacts Individually
- Routing Inbound Faxes
- Configuring Modems
- Creating a Restore File
- Fax Management
- Logging into the Web Management Interface
- Navigating the Web Management Interface
- Checking System, Printer, and Share Status
- Checking Modem and Fax Status
- Sending Now
- Canceling Outbound Faxes
- Resetting a Busy Modem
- Blocking a Modem's Inbound and Outbound Faxes
- Checking the Mail Queue
- Viewing Logs
- Rebooting FaxFinder
- Restoring Factory Defaults
- Restoring Configuration
- Managing Users, Contacts, and Recipients
- Advanced Configuration
- Dialing Rules
- Using Active Directory with FaxFinder
- Cover Pages
- FaxFinder Fax Client Software for Windows and Mac
- Troubleshooting
- T.37 Advanced Usage
- Regulatory Information
- 47 CFR Part 68 Telecom
- 47 CFR Part 15 Regulation Class A Devices
- Fax Branding Statement
- Canadian Limitations
- Industry Canada Class A Notice
- EMC, Safety, and R&TTE Directive Compliance
- Restriction of the Use of Hazardous Substances (RoHS)
- REACH Statement
- Waste Electrical and Electronic Equipment Statement
- Information on HS/TS Substances According to Chinese Standards
- Information on HS/TS Substances According to Chinese Standards (in Chinese)
- Configuring Active Directory for Use with FaxFinder
- Index
PRODUCT OVERVIEW
Listé UL à 40° C, limité par l'alimentation. La certification UL ne s'applique pas ou ne s'étend pas à des
températures dé passant 40° C, et le produit n'a pas été évalué par UL pour une température ambiante dépassant
40° C.
Note: This product is intended to be supplied by a Listed Power Unit marked L.P.S. or Class 2 and rated 12 VDC
5A.
2
The difference in maximum size allowed is due to the data encoding for T.37, the client software, and API
attachments.
FaxFinder Expansion Module Specifications
Category Description
Dimensions
Dimensions W 15.335 in x H 1.717 in x D 6.033 in. For dimensions with mounting brackets, refer
to the Mounting a FaxFinder Expansion Unit topics.
Weight 7.77 pounds
Connectors
Connectors USB 2.0 High speed Mini B connector
8 or 16 RJ-11 line jacks
Power Requirements
Input Voltage 9 Volts
Refer to FaxFinder Expansion Modules Power Draw for additional power
information.
Environment
Operating Environment -40° to 152° F (-40° to +67° C)
Storage Environment -40° to 185° F (-40° to +85° C)
Relative Humidity 20 to 90% noncondensing
Certifications
EMC Approvals FCC Part 15 Class A, EN 55022 Class A, EN 55024
Safety Approvals UL\cUL 60950-1 ed.2, IEC 60950-1 ed.2 & EN (2006 +am.11)
Telecom Approvals 47CFR Part 68, CS03, TBR21; Other countries also included
Note: This product is intended to be supplied a listed power Module marked L.P.S. or Class 2 and rates from
9Vdc 2A.
Multi-Tech Systems, Inc. recommends that the customer incorporate a 10% buffer into their power source when
determining product load.
1
Typical is the current while the unit is powered up, but not sending or receiving faxes.
2
Maximum is the current while sending or receiving faxes.
3
Peak is the current while sending or receiving faxes.
12 FaxFinder
®
Fax Server FF240, FF440, FF840 Administrator Guide