Specifications

CELLULAR INFORMATION
■ One SMA-to-UFL cable for use with all cellular modems that have a UFL antenna connector.
■ One SMA-to-UFL cable for use with products that include an optional GPS receiver.
Coaxial Cable Specifications
Cable Type Coaxial Cable
Attenuation <1.0db
Connector Impedance 50 ohm
Maximum Cable Length 16" (40 cm)
Optional antenna cables can be ordered from Multi-Tech Systems, Inc.
Part Number Description
CASMA-UFL-1 SMA-to-UFL Coax Cable (Single Pack)
CASMA-UFL-10 SMA-to-UFL Coax Cable (Ten Pack)
CARSMA-UFL-1 RSMA-to-UFL Coax Cable (Single Pack)
CARSMA-UFL-10 RSMA-to-UFL Coax Cable (Ten Pack)
Approved Antenna Cable Parts
GC Protronics: 20930C
Samtec: ASP-116785-01
The coaxial cable is an RG-178/U
Activating Accounts for Cellular Devices
Some Multi-Tech cellular modems have been pre-configured to operate on a specific cellular network, such as
Sprint and Verizon Wireless. However, before you can begin to use the modem, you must set up a cellular data
account with your cellular network provider. Refer to Multi-Tech’ s Cellular Activation Web site
http://www.multitech.com/activation.go for information on activating your cellular modem.
MEID, ESN, IMEI Information
The cellular carrier asks you for device identification information, either MEID, ESN or IMEI depending on the type
of product you are using::
■ For CDMA: The modem's MEID is printed on the label.
■ For EV-DO or 1xRTT: The modem’s ESN is printed in hexadecimal format on the label.
■ For GPRS/HSPA+: The modem's 15-character IMEI (International Mobile Equipment Identity) number is
printed on the modem's label.
Refer to the device labels for the location of the device identification.
QuickCarrier™ USB-E MT100UCC-C2 Developer Guide 9