Specifications

CELLULAR INFORMATION
IMPORTANT: Both the QuickCarrier USB-E and the modem include labels. When the cellular carrier asks you to
provide the modem's model identification, give the Multi-Tech cellular model identification, not the host device
model.
Cellular Approvals and Labeling Requirements
Approvals and Certification
The Multi-Tech SocketModem is an Industry and/or Carrier Approved modem. In most cases, when integrated and
used with an antenna system that was part of the Multi-Tech modem certification, no additional approvals or
certifications are required (however, EV-DO has a few exceptions) for the device you develop as long as the
following are met:
■ PTCRB Requirements (GPRS and HSPA+ only) The antenna system cannot be altered.
■ Model Identification The Multi-Tech model identification allows the carrier to verify the modem as one of its
approved models This information is located on the modem's label.
Modem Label Example
Note: The label is shown larger than actual size.
1 Multi-Tech model information
2 MEID (C2) for the attached modem
QuickCarrier USB-E Label
Note: The label is shown larger than actual size.
10 QuickCarrier™ USB-E MT100UCC-C2 Developer Guide