User guide

Chapter 2: Getting Started
Multi-Tech Systems, Inc. CallFinder GSM Cellular Gateway 12
A3. Establish a named HyperTerminal ‘connection’ to the CallFinder.
A4. Select the command computer’s available COM port that is physically connected to the CallFinder.
Click OK.
A5. At the “COMx Properties” screen, set the connection parameters to these values:
Bits per second = 115200
Data bits: = 8
Parity: = none
Stop bits: = 1
Flow control = Hardware
Click Apply and click OK. Click OK again when the “COMx Properties” screen returns.