User guide

3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS
95 AT Commands for EV-DO-EV3 Modems
80 <type_addr: 128>
1096224658F1 <callback_address:01692264851>
1002 <Teleservice_id: 4098(decimal)>
00 <priority: normal >
00 <encoding_type: octet >
16 <data_len: 22>
62626262626262626262626262626262626262626262
<user_data: bbbbbbbbbbbbbbbbbbbbbb>
Parameters and Values Text Mode
<da> Destination address, string type represented in the currently selected character
set. See +CSCS.
ASCII characters in the set (0 9), #,*,(A D);
Maximum length varies by carrier.
For Sprint and Aeris, maximum length is 32 characters.
For Verizon, maximum length is 20 characters.
<toda> Type of destination address.
129 Number in national format.
145 Number in international format. Contains the "+".
<stat> Message status.
"REC UNREAD" New received message unread. Default for DELIVER messages.
"REC READ" Received message read.
"STO UNSENT" Message stored not yet sent. Default for SUBMIT messages.
"STO SENT" Message stored already sent.
After command line is terminated with <CR>, the device responds sending a four character sequence
prompt:
<CR><LF><greater_than><space> (IRA 13, 10, 62, 32)
Notes Text Mode
 The DCD signal is in ON state while text is entered.
 Echoing entered characters back from the TA is controlled by echo command E.
 To write the message issue Ctrl-Z char (0x1A hex).
 To exit without writing the message issue ESC char (0x1B hex).
 If message is successfully written in the memory, then the result is sent in the format:
+CMGW: <index>
where:
<index> - message location index in the memory <memw>.
 If message storing fails for some reason, an error code is reported.
 To discard SMS, press the ESC key. An OK response will be returned.