User guide

3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS
77 AT Commands for EV-DO-EV3 Modems
3GPP TS 27.005 AT Commands for SMS and CBS
General Configuration
Select Message Service +CSMS
Set command selects messaging service <service>. It returns the types of messages supported by the ME:
+CSMS: <mt>,<mo>,<bm>
Read command reports current service setting along with supported message types in the format:
+CSMS: <service>,<mt>,<mo>,<bm>
where:
<service> Messaging service.
<mt> Mobile terminated messages support.
<mo> Mobile originated messages support.
<bm> Broadcast type messages support.
For more information about these values, see the Values section for the set command.
where:
<mt> Mobile terminated messages support.
0 Type not supported.
1 Type supported.
<mo> Mobile originated messages support.
0 Type not supported.
1 Type supported.
<bm> Broadcast type messages support.
0 Type not supported. Default: 0.
1 Type supported.
Test command reports the supported value of the parameter <service>.
Syntax
Command Command type
AT+CSMS=<service> Set
AT+CSMS? Read
AT+CSMS=? Test
Parameters and Values
<service>
2 The syntax of SMS AT Commands is compatible partially with 3GPP TS 27.005
Phase 3 version 4.7.0 (reflected partially IS-637A, B in CDMA network). Default: 2.