User guide

MOBILE IP COMMANDS
243 AT Commands for EV-DO-EV3 Modems
Note
 If the value provisioned is not committed to non-volatile memory, temporary values are deleted at the end
of the following call or if $QCMIPP is called.
Example
AT$QCMIPMHSS?
$QCMIPMHSS: Unset
OK
AT$QCMIPMHSS=secret data
OK
AT$QCMIPMHSS?
$QCMIPMHSS: Set
OK
AT$QCMIPMHSS=?
$QCMIPMHSS: (20,21,23-7E),(0,1)
OK
Medium Data Rate $QCMDR
Set command changes the medium data rate settings.
Read command displays the current setting:
$QCMDR:(value)
Test command returns the parameter range:
$QCMDR:(0-3)
Syntax
Command Command type
AT$QCMDR=<value> Set
AT$QCMDR? Read
AT$QCMDR=? Test
Parameters and Values
<store_nv> Set medium data rate.
0 MDR service only.
1 MDR service if available.
2 LSPD only.
3 SO 33, if available.
Note
 When the AT$QCMIP=1 or 2, AT$QCMDR is always fixed at 3 and cannot be changed. It is necessary to
change $QCMIP=0 first to change $QCMDR to 0-3 and it also means not using Mobile IP but Simple IP only.