User guide

MOBILE IP COMMANDS
237 AT Commands for EV-DO-EV3 Modems
Reverse Tunneling Preference $QCMIPRT
Set command sets the reverse tunnelling preference.
Read command returns the current status, in the format:
$QCMIPRT: <rev_tun>,<store_nv>
Test command returns the parameter range:
$QCMIPRT: (0,1),(0,1)
Syntax
Command Command type
AT$QCMIPRT=<rev_tun>,<store_nv> Set
AT$QCMIPRT? Read
AT$QCMIPRT=? Test
Parameters and Values
<rev_tun> Reverse tunneling preference.
0 Disable.
1 Enable.
<store_nv> Data store option.
0 Store in RAM.
1 Store in non-volatile memory.
Example
AT$QCMIPRT=?
$QCMIPRT: (0,1),(0,1)
OK
AT$QCMIPRT?
$QCMIPRT: 0,0
OK
AT$QCMIPRT=1,1
OK
AT$QCMIPRT?
$QCMIPRT: 1,1
OK