User guide

VERIZON SPECIFIC AT COMMANDS
225 AT Commands for EV-DO-EV3 Modems
Example
AT#BANDCLS?
#BANDCLS: BC0,(BC0,BC1)
OK
Set Default Band #DEFAULTBAND
Set command sets the band to determine system selection.
Read command reports the current value of the parameters, in the format:
#DEFAULTBAND: <Band>,<PRL_Enable>
PRL_Enable represents the PRL_enable of the PRL included in EV3 or C2.
Syntax
Command Command type
AT#DEFAULTBAND=<Band> Set
AT#DEFAULTBAND? Read
Parameters and Values
<band>
0 Home only. The PRL Preferred only setting is disabled.
1 Automatic. PRL Preferred only setting is enabled.
2 Automatic-A.
3 Automatic-B.
Notes
 PRL Preferred Only (PRL PREF ONLY) is based on the specific PRL loaded onto the module and is not user
controlled.
 The Default Band mode is made available when the PRL PREF ONLY setting is set to FALSE. When it is set to
FALSE, the mobile station’s system select setting provides options of Home only, Automatic-A, and
Automatic-B.
 When the PRL is set to True, the mobile station’s system select provides only Home Only and Automatic.
Example
AT#DEFAULTBAND?
#DEFAULTBAND:1,1
OK
AT#DEFAULTBAND=0
OK
AT#DEFAULTBAND?
#DEFAULTBAND:0,1
OK