User guide

VERIZON SPECIFIC AT COMMANDS
219 AT Commands for EV-DO-EV3 Modems
Example
AT+CMGF=1
OK
AT+VCMGR=2
+VCMGR: "REC READ","",0111234567",20071221160610,,4098,,16,9
TEST MESSAGE2
OK
AT+VCMGR=3
+VCMGR: "STO SENT","01191775982","01096529157",20071221160610,,4098,,16,9
TEST MESSAGE3
OK
List Message +VCMGL
Execute command reports the list if all messages with status value <stat> stored into <memr> message storage.
<memr> is the message storage for read and delete SMs as the last settings of command +CPMS.
Test command returns a list of supported <stat>s.
Syntax
Command Command type
AT+VCMGL[=<stat>] Execute
AT#VCMGL=? Test
Parameters and Values
<stat> <stat>
"REC UNREAD" - New message.
"REC READ" - Read message.
"STO UNSENT" - Stored message not yet sent.
"STO SENT" - Stored message already sent.
"ALL" - All messages.
If the indicated index contains a Received or Sent/Unsent message, it appears in the
following format:
+VCMGL:<index>,<stat>,<orig_num>,<callback>,<date>[,<tooa>,<tele_id>,<priority>,<enc_ty
pe>,<length>]<CR><LF> <data>
Note: Italicized information appears for received messages only and only if AT+CSDH=1 has
been set.
Where
<index> - Message index.
<stat> - Message status.
<orig_num> - Origination number.