User guide

AUDIO
COMMANDS
AT Commands for EV-DO-EV3 Modems
192
Example
AT#TONE=?
#TONE: (0-9,#,*,A-D,G-L,Y,Z),(1-300)
OK
AT#TONE=3,60
OK
AT#TONE=3
OK
Tone Classes Volume #TSVOL
Set command selects the volume mode for one or more tone classes.
Read command returns for each class of tones the last setting of <mode> and, if <mode> is not 0, of <volume>
too, in the format:
#TSVOL: 1,<mode1>[,<volume1>]<CR><LF>
…
#TSVOL:64,<mode64>[,<volume64>]
Test command returns the supported range of values of <class>, <mode> and <volume>.
Syntax
Command Command type
AT#TSVOL=<class>,<mode>[,<volume>] Set
AT#TSVOL? Read
AT#TSVOL=? Test
Parameters and Values
<class> Sum of integers, each representing a class of tones to which the command refers.
1 CDMA tones.
2 Ringer tones.
4 Reserved.
8 Reserved.
16 DTMF tones.
32 Reserved.
64 User-defined tones.
128 Reserved.
255 All classes.
<mode> Indicates volume that is used for the classes of tones represented by <class>.
0 Default volume is used.
1 The volume <volume> is used.
<volume> Volume to be applied to the set of classes of tones represented by <class>; it is
mandatory if <mode> is 1.
0-14 To get the value of max, issue the Test command AT#TSVOL=?.