User guide

AUDIO
COMMANDS
AT Commands for EV-DO-EV3 Modems
186
5 Connected.
<SMP state>
0 Inactivity state.
1 AMP setup state.
2 AT initialize state.
3 AN initialize state.
4 Open state.
5 Session closed state.
<ALMP state>
0 Inactivity state.
1 Initialization state.
2 Idle state.
3 Connected state.
<Init state>
0 Inactivity state.
1 Network determination state.
2 Pilot acquisition state.
3 Synchronization state.
4 Time transfer state.
5 Fast acquisition state.
<Idle state>
0 Inactivity state.
1 Monitor state.
2 Sleep state.
3 Connection setup state.
4 Suspends state.
5 Connection setup suspend state.
<Con state>
0 Inactivity state.
1 Connected state.
<RUP state>
0 Inactivity state.
1 Idle state.
2 Connection setup state.
3 Connected state.
4 Synchronize connection setup state.
<Hybrid mode>
0 Hybrid off.
1 Hybrid on.
<Prot> Active protocol revision.
0 Unknown.
1 HDR Release 0.
2 HDR Release A.
3 HDR Release B.
<ATI type> Access Terminal Identifier type.
0 BATI (Broadcast).
1 MATI (Multicast).