User guide

AUDIO COMMANDS
173 AT Commands for EV-DO-EV3 Modems
Syntax
Command Command type
AT#MODE=[=<mode>]? Set
AT#MODE? Read
AT#MODE=? Test
Parameters and Values
<mode> Operational mode selection.
Offline Offline mode for RF tests.
Reset Resets the module.
PWROFF Powers off the module.
LPM Lower power mode. RX/TX turned off, unable to receive network.
FTM Factory test mode. For RF tests.
ONLINE Online mode. Returns to normal operation.
Notes
 Some mode change is not possible, such as LPM mode to FTM mode.
Example
AT#MODE=OFFLINE
OK
AT#MODE=LPM
OK
AT#MODE=FTM
OK
AT#MODE=ONLINE
OK
AT#MODE=RESET
OK
AT#MODE=PWROFF
OK
CDMA Notification #NOTI
Set command sets to enable or disable related CDMA notification.
Read command returns the current status flag of <onoff>, in the format:
#NOTI: <onoff (for index 1)>,<onoff (for index 2)>, … ,<onoff (for index 18)>
Test command reports the range of the parameter <index>, <onoff>.