User guide

GPS AT COMMANDS SET
165 AT Commands for EV-DO-EV3 Modems
Example
AT$GPSACP
$GPSACP:080220.479,4542.82691N,01344.26820E,259.07,3,2.1,0.1,0.0,0.0,270705,09
OK
Save GPS Parameters $GPSSAV
Save GPS Parameters Configuration $GPSSAV
Execute command stores the current GPS parameters in the non-volatile memory of the device.
Test command returns the OK result code.
Syntax
Command Command type
AT$GPSSAV Execute
AT$GPSSAV=? Test
Notes
 To use the new configuration, restart the module.
Example
AT$GPSSAV
OK
Restore to Default GPS Parameters $GPSRST
Execute command reset GPS parameters to the factory default configuration and stores them in the non-volatile
memory.
Test command returns the OK result code.
Syntax
Command Command type
AT$GPSRST Execute
AT$GPSRST=? Test
Notes
 To use the new configuration, restart the module.
Example
AT$GPSRST
OK