User guide
ENHANCED IP STACK AT COMMANDS
AT Commands for EV-DO-EV3 Modems
158
Example
AT#EMAILD=”me@myaddress.com”,”subject of the mail”
>message body… this is the text of the mail message…
CTRL-Z
..wait..
OK
Message has been sent.
E-mail Parameters Save #ESAV
Execute command stores the e-mail parameters in the device’s non-volatile memory. Parameters stored are:
E-mail user name
E-mail password
E-mail sender address
E-mail SMTP server
Test command returns the OK result code.
Syntax
Command Command type
AT#ESAV Execute
AT#ESAV=? Test
Notes
If some parameters are not previously specified a default value is used.
E-mail Parameters Reset #ERST
Execute command resets the e-mail parameters to the “Default ” configuration and stores them in the non-volatile
memory of the device. Parameters reset are:
E-mail user name
E-mail password
E-mail sender address
E-mail SMTP server
Test command returns the OK result code.
Syntax
Command Command type
AT#ERST Execute
AT#ERST=? Test