User guide

ENHANCED IP STACK AT COMMANDS
155 AT Commands for EV-DO-EV3 Modems
Example
AT#EUSER="myE-Name"
OK
AT#EUSER?
#EUSER: "myE-Name"
OK
E-mail Authentication Password #EPASSW
Set command sets the password string used during the authentication step of the SMTP.
Test command returns the maximum allowed length of the string parameter <e-pwd>.
Syntax
Command Command type
AT#EPASSW=[<e-pwd>] Set
AT#EPASSW=? Test
Parameters and Values
<e-pwd> String type, e-mail authentication password.
Any string value up to the maximum length of 50.
Default: empty string “”.
Note: If no authentication is required then the <e-pwd> parameter is empty "".
Notes
 This is a different password field than the one used for authentication. See #PASSW.
Example
AT#EPASSW="myPassword"
OK
E-mail Sending with CDMA Context Activation #SEMAIL
Execute command sends an e-mail message. If not previously activated by #EMAILACT, activates a CDMA
context. The CDMA context activated by #SEMAIL is deactivated when the e-mail is sent.
Test command returns the OK result code.
Syntax
Command Command type
AT#SEMAIL=[<da>,<subj><att>] Execute
AT#SEMAIL=? Test