User guide

FTP AT COMMANDS
AT Commands for EV-DO-EV3 Modems
142
Notes
 The Execute command causes an ERROR result code to be returned if no FTP connection is open.
FTP Type #FTPTYPE
Set command, issued during an FTP connection, sets the file transfer type.
Read command returns the current file transfer type, in the format:
#FTPTYPE: <type>
Test command returns the range of available values for parameter <type>:
#FTPTYPE: (0,1)
Syntax
Command Command type
AT#FTPTYPE=[<type>] Set
AT#FTPTYPE? Read
AT#FTPTYPE=? Test
Parameters and Values
<type> File transfer type.
0 Binary.
1 ASCII.
Notes
 The command causes an ERROR result code if no FTP connection is opened.
FTP Read Message #FTPMSG
Execute command returns the last response from the server.
Test command returns the OK result code.
Syntax
Command Command type
AT#FTPMSG Execute
AT#FTPMSG=? Test