User guide

FTP AT COMMANDS
AT Commands for EV-DO-EV3 Modems
140
FTP AT Commands
FTP Timeout #FTPTO
Set command sets the timeout used when opening either the FTP control channel or the FTP traffic channel.
Read command returns the current FTP operations timeout, in the format:
#FTPTO: <tout>
Test command returns the range of supported values for parameter <tout>
Syntax
Command Command type
AT#FTPTO=[<tout>] Set
AT#FTPTO? Read
AT#FTPTO=? Test
Parameters and Values
<tout> Time-out in 100 ms units.
100-5000 Hundreds of ms. Default: 100.
Notes
 The parameter is not saved in non-volatile memory.
FTP Open #FTPOPEN
Execute command opens an FTP connection toward the FTP server.
Test command returns the OK result code.
Syntax
Command Command type
AT#FTPOPEN=[<server:port>,<username>,<password>[,<mode>]] Execute
AT#FTPOPEN=? Test
Parameters and Values
<server:port> String type, address and port of FTP server. Default: port 21.
<username> String type, authentication user identification string for FTP.
<password> String type, authentication password for FTP.
<mode>
0 Active mode. Default: 0.
1 Passive mode.
Notes
 Before opening an FTP connection the PDP context must be activated by AT#SGACT.