User guide

SINGLE SOCKET AT COMMANDS
139 AT Commands for EV-DO-EV3 Modems
Single Socket AT Commands
Socket Parameters Reset #SKTRST
Execute command resets the actual socket parameters in the device’s non-volatile memory to the default ones.
The socket parameters to reset are:
 Packet Size
 Socket Inactivity Time-out
 Data Sending Time-out
 Socket Type
 Remote Port
 Remote Address
 TCP Connection Time-out
Test command returns the OK result code.
Syntax
Command Command type
AT#SKTRST Execute
AT#SKTRST=? Test
Notes
 User ID and password are not affected by this command. They are not set to default values; they keep the
previous value.
Example
AT#SKTRST
OK
Socket parameters have been reset.