User guide

CUSTOM AT COMMANDS
123 AT Commands for EV-DO-EV3 Modems
where:
<PNn> - Value of nth (active/candidate/neighbor )pilot sets.
<PNn_Str> - Pilot strength of n
th
(active/candidate/neighbor )pilot sets.
Test command returns the OK result code.
Syntax
Command Command type
AT#MONI[=[<number>]]
AT#MONI=?
Parameters and Values
<number> CDMA Network
0 Active set. Default: 0.
1 Candidate set.
2 Neighbor set.
3-7 Not available.
Notes
 Candidate set (number=1) displays in traffic state only, per CDMA specifications (refer to 2.6.6.1.2 Pilot Sets
of C.S0005). If the device stays in an idle state, pilot set, and strength are displayed as 0.
Example
AT#MONI=0
OK
AT#MONI
A_PN:80,A_PN_STR:-10
OK
AT#MONI=?
OK