User guide

CUSTOM AT COMMANDS
119 AT Commands for EV-DO-EV3 Modems
Example
AT#NITZ=?
OK
AT#NITZ?
#NITZ: "12/09/10,13:31:32"
OK
Skip Escape Sequence #SKIPESC
Set command enables or disables skipping the escape sequence +++ while transmitting during a data connection.
Read command reports whether escape sequence skipping is currently enabled or not, in the format:
SKIPESC: <mode>
Test command reports supported range of values for parameter <mode>.
Syntax
Command Command type
AT#SKIPESC=[<mode>] Set
AT#SKIPESC? Read
AT#SKIPESC=? Test
Parameters and Values
<mode>
0 Does not skip the escape sequence; its transmission is enabled. Default: 0.
1 Skips the escape sequence; its transmission is not enabled.
Notes
 In case of an FTP connection, the escape sequence is not transmitted, regardless of the command setting.
Escape Sequence Guard Time #E2ESC
Set command sets a guard time in seconds for the escape sequence in CDMA to be considered a valid one (and
return to online command mode).
Read command reports whether escape sequence skipping is currently enabled or not, in the format:
#E2ESC: <gt>
Test command returns the OK result code.
Syntax
Command Command type
AT#E2ESC=[<gt>] Set
AT#E2ESC? Read
AT#E2ESC =? Test