User guide

CUSTOM AT COMMANDS
101 AT Commands for EV-DO-EV3 Modems
Example
AT#CIMI
#CIMI: 310001114445555
OK
Mobile Equipment Identifier #MEID
Read command returns current MEID.
Test command returns the OK result code.
Syntax
Command Command type
AT#MEID? Read
AT#MEID=? Test
Note
 MEID is broken into two parts, high hex values separated by low hex values.
Example
AT#MEID?
#MEID: A10000,09D400EF
OK
Software Shut Down #SHDN
Execute command causes device to detach from the network and shut down. Before definitive shut down an OK
response is returned.
Test command returns the OK result code.
Syntax
Command Command type
AT#SHDN Execute
AT#SHDN=? Test
Notes
 After the execute command is issued, previous activity is terminated. The device does not respond to any
further command.
 EV3 and C2 devices restart in 5-10 seconds.
 The maximum time to shutdown the device, completely is 25 seconds.
Extended Reset #Z
Set command loads both base section and extended section of the specified user profile stored with AT&W and
selected with AT&P.
Test command tests for command existence.