Specifications

Chapter 14 – Short Message Service Control Commands
80 Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide
Values: <mem1> Memory area to be used to list, read and delete messages. It can be:
“MT” SMS Mobile Terminated message storage in NV (default)
Each reported memory area includes information about current used & total
storage locations. When <mem1> is selected, all following +CMGL, +CMGR and
+CMGD commands are related to the type of SMS stored in this memory.
<used> The number of used storage locations in the reported area.
<total> The total number of available storage locations.
Set SMS Compose Language and Encoding +WSCL
Description: The +WSCL command sets the SMS composition language and encoding types. When composing
a message (+CMGS), the SMS language and encoding fields will be set using the current +WSCL
value.
Syntax: AT+WSCL = <lang>, <encod>
Command
Possible Responses
AT+WSCL=1,2
OK
Note: Set language to English, encoding to ASCII
AT+WSCL=6,4
OK
Note: Set language to Chinese, encoding to
USC-2 UNICODE
AT+CMGS=”8585551212”<CR>
Ãû×Ö<ctrl-Z>
Note: Send a message in Chinese
+CMGS: <mr>
OK
Note: Message sent
Values: <lang>
0 Unspecified (default)
1 English
2 French
3 Spanish
4 Japanese
5 Korean
6 Chinese
7 Hebrew
<enc>
0 Octet (or Unspecified) (default)
1 IS91EP
2 ASCII
3 IA5
4 USC-2 UNICODE
New Message Indication +CNMI
Description: This command selects the procedure for message reception from the network.
Note: Cell Broadcast messages and Status Report messages are not stored.
Syntax: +CNMI=<mode>,<mt>,<bm>,<ds>,<bfr>