Specifications

Chapter 13– OMA/DM Control Commands
74 Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide
Device Services Configuration +WDSC
Description: This command allows a user to configure:
 The user agreement for connection, package download and package install
 The mode of automatic registration to the IDS server
Syntax: AT+WDSS=<Mode>,[<State> || <Config>]
Command
Possible Responses
<Mode>= 0, 1, 2, 3
AT+WDSC=<Mode>,<State>
<Mode>= 5
AT+WDSC=<Mode>,<Config>
OK
Note: No connection to the server and the used PDP
context for the next connection is the one defined by the
provisioning.
AT+WDSC?
+WDSC: 0,<State>
+WDSC: 1,<State>
+WDSC: 2,<State>
+WDSC: 5,<Config>
OK
AT+WDSC=?
+WDSC: (list of supported<Mode>s), (list of supported
[<State>s ]<Config>]
OK
Values: <Mode>
0 User agreement for connection
When this mode is activated and when a notification SMS is received by the
modem, an indication (see +WDSI indication) is returned by the modem to
request an agreement before connecting to the IDS server.
1 User agreement for package download
When this mode is activated, an indication (see +WDSI indication) is returned by
the modem to request an agreement before downloading any package.
2 User agreement for package install
When this mode is activated, an indication (see +WDSI indication) is returned by
the modem to request an agreement before installing any package.
3 Not Supported
4 Not Supported
5 Registration configuration
The registration is performed using +WDSS command.
<State> Status of the mode (Only for <Mode>= 0, 1, 2)
0 Disabled (default value)
1 Enabled
<Config> Status of the Registration configuration (Only for <Mode>= 5)
0 Not configured (default value)
1 Configured
Parameter
Storage: <State> and <Config> parameters are stored in flash without using &W command. &F has no
effect on these parameters.