Specifications

Chapter 13– OMA/DM Control Commands
68 Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide
Device Services Session +WDSS
Description: This command allows a user to configure a dedicated Network Access Point (NAP) and to initiate
a connection to the OMA/DM server.
Syntax: +WDSS: =<Mode>,<Apn>[,<User>[,<Pwd>]]
Command
Possible Responses
AT+WDSS?
+WDSS: 0,<Apn>
+WDSS: 1,<Action>
OK
AT+WDSS=?
+WDSS: 0,(Max length for <Apn>),(Max length for
<User>),(Max length for <Pwd>),
+WDSS: 1,(0-1)
OK
AT+WDSS=1,<Action>
OK
AT+WDSS=0,<Apn>[,<User>[,<Pwd>]]
Note: Define the APN for Device
Services
OK
Values: <Mode>
0 PDP context configuration for Device Services
1 User Initiated connection to the Device Services server
<Apn> Access point name for Device Services. String type, up to 50 chars.
<User> Login for the APN. String type, up to 30 chars.
<Pwd> Password for the APN. String type, up to 30 chars.
<Action> Only for <Mode>=1
0 Abort the current session with the Device Services server. Default.
1 Establish a Device Configuration session with the Device Services server.
2 Establish a Firmware Update session with the Device Services server.
3 Establish a PRL Update session with the Device Services server.
Parameter
Storage: <APN>,<User> and <Pwd> parameters are stored in flash without using the AT&W command.
AT&F has no effect on these parameters.
Device Services Error +WDSE
Description: This command allows a user to display the last HTTP response received by the device during an
OMA session.
Syntax: AT+WDSE
Command
Possible Responses
AT+WDSE
+WDSE: <HTTP Status>
OK