Specifications

Chapter 7 – Status Commands
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide 23
0 ≤ Ind Level ≤ 32767.
For example: 128 (network lost indication) + 64 (network service available
indication) = 192.
The response is OK if the values are in the previous range.
+WIND General Indicator Unsolicited Message
The unsolicited response indicates a variety of events.
Result
Examples: +WIND: 4
Note: General indication that AT commands are ready to be accepted
The supported events are:
<event>
0 R-UIM absent or R-UIM failed to initialize
1 R-UIM present and initialized
2 A calling party is alerting
3 Product is ready to process read-only AT commands
4 Product is ready to process all AT commands that are not blocked by the R-UIM
5 A call <idx> has been created (after ATD, +CCWA, etc.)
6 A call <idx> has been released (NO_CARRIER, ATH, etc.)
7 Network service is available
8 The network is lost.
9 Reserved
10 Shut down is complete
11 Corrupted RF calibration values (checksum mismatch)
12 Reserved
13 Reserved
14 Reserved
15 Reserved
16 SMS service ready indication
The following table indicates the correspondences between <InLevel> values and “+WIND:
<event> […]” indications that are activated.
<IndLevel> Value
Corresponding <event>
1
0 and 1
2
2
4
3
8
4
16
5
32
6
64
7
128
8
256
9
512
10
1024
11
2048
12
4096
13 and 14